Arthritis patients have surgical options other than knee replacement

March 23, 2017

New Delhi, Mar 23: For those suffering with age-related (degenerative) arthritis of the knee, a stage comes when all the reasonable non-operative options stops working. Here's when the option of surgery comes into the picture.

KneeDr J Maheshwari, Director and Chief of Knee & Shoulder Service and Head, Max Smart Super Specialty Hospital, Saket said that one common option suggested is knee replacement, and it being as intimidating as it sounds, it is natural that patients look for an alternative. Other non operative options such as stem cell treatment, oil messages etc. with large claims and no scientific backing also come into consideration.

Scared of the so called 'Total Knee Replacement', the patients often fall for alternative treatment modalities with tall claims and no scientific validity, and ultimately land up in a situation where knee replacement, like it or not, remains the only option.

Sometimes the surgery is delayed so much that even the best of surgeons cannot give a good result, and the fear of the patient actually 'comes true', said Dr Maheshwari.

There is a recent advance in medicine, where the scientific community is focusing on 'joint preservation' and not 'replacement' options. Some of these are non surgical - such as physiotherapy, weight reduction, modification in life-style etc, but others are surgical, where effort is to keep the original joint going. Some of these options may be surgical, aimed at corrective surgery in early stages of the arthritis, where one can see that if left to itself that particular joint is going to the path of damage, and hence future knee replacement.

These options could be key-hole surgery (arthroscopic surgery), which, if done at the right time, can halt the progress of the disease and may save one from knee replacement. Unfortunately, most patients do not have significant complaints at this stage, and may ignore their problem.

Dr Maheshwari further stated, in some patients with deformed legs (bow legs), the progress of arthritis can be halted by correcting the alignment, what is called high tibial osteotomy (HTO). Best approach, therefore would be to see a specialist to get yourself evaluated whether you have some such issue which may be the reason for your knee to take downhill course, and whether some intervention can prevent it from reaching knee replacement stage.

Even in cases, where joint is damaged beyond a certain level, it is not necessary that total replacement is the only option. There are options where only the damaged part of the knee is capped (partial replacement).

Knee, as we know it today, is made up of three distinct compartments. Often the damage is limited to only one of the three compartments, and in such cases, a limited surgery on that compartment can produce good results, without changing the whole joint. These operations are more recent in the armamentarium of knee surgeons, and have been shown to be effective. These options are not applicable in every patient of advanced knee arthritis, but in some, selected by careful investigations and special X rays. These are good joint preserving options.

As a last resort, knee replacement is always an option in case it is ascertained that all compartments of the knee are damaged. Also knee replacement remains a potent back up option in any case where partial replacement has been done in the past, and for some reason it has not given desired results.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
Agencies
June 20,2020

At a time when the country is yet to recover from the shock of losing 20 Indian soldiers in a violent clash with the Chinese People's Liberation Army (PLA) troops in Ladakh's Galwan Valley, another shocker has come to light with news coming of a malware hitting the Indian Railways network and snooping its data for foreign countries, including train movements, sources in the intelligence agencies said on Friday.

Meanwhile, Railways Board Chairman V K Yadav said that the national transporter keeps on receiving malware security threats and the engineers in the railways keep on taking all precautions and keeps on updating the firewalls to prevent data theft.

The news comes a day after the Dedicated Freight Corridor Corporation Limited (DFCCIL) decided to terminate the 417-km signalling project worth Rs 471 crore with Chinese firm Beijing National Railway Research and Design Institute of Signal and Communication Group Company Limited (BNRRDISC) due to non-performance.

According to intelligence agency sources, the system of the Railways has been hit by the APT 36 Malware campaign. The source said that the intel agencies have also alerted the Railway Board to instantly disconnect the system with the Internet and change the password immediately.

The source said the APT 36 Malware is connected to Pakistan, which is a close ally of China. The source further said that following the red flag from the intel agencies, the system of a senior Principal Executive Director of the Railways, working in its vigilance department, has been taken for cleaning the malware threat.

As per the source, through the APT 36 Malware campaign, data stored in the Indian Railways systems were being stolen and stored in foreign locations, including the movement of the trains.

He further claimed that the APT 36 Malware also tried to take defence movement data. 

The source said the APT 36 Malware effect was reported from at least four systems of the Indian Railways.

Responding to queries, the Railways Board Chairman said: "Whether it is our systems or the IRCTC, we continuously update it with firewalls, and it is an ongoing process as we get the updates." 

Yadav said that our system is updated time to time. "We get malware threat on a regular basis. And we look at it continuously," he said. 

When pressed further about the malware threat in four railways systems, he said: "It has not come to our notice that some information has been leaked. Our systems are secure and our engineers keep on working on it."

According to intel sources, besides Railways, there was also malware threat in the defence, central police organisations, education and healthcare sectors, the source said.

In view of the threat, the intel agencies have asked the departments concerned to change the passwords of emails and online services from secure computers, format the hard-disk of the affected computers after taking back-up and re-install the operating systems and other softwares.

Sources in the Railways had said on Thursday that DFFCIL, which is looking after the work of the Dedicated Freight Corridor Project, has decided to terminate the tender with BNRRDISC.

A source in the Railway Ministry said that it has informed the Railway Board and the World Bank to take the final decision in the matter.

The source said the project was awarded to the Chinese firm in 2016 for signalling and telecommunication work on the 417-km Kanpur-Deen Dayal Upadhyaya section of the Eastern Dedicated Freight Corridor (EDFC). 

The source disclosed that the contract was awarded to the Beijing National Railway Research and Design Institute in June 2016. The source further said that even after four years, the progress in the project was only 20%. The issues that led to the termination of the project are reluctance by the company to furnish technical documents, as per the contract agreement, such as logic design of electronic interlocking.

The source further said that other issues like non-availability of their engineers and authorised personnel on site were a serious constraint. Even physical work could not progress as they have no tie-up with local agencies. 

The 3,373-km DFC, a flagship project of the Railways, aims to augment rail transport capacity to meet the growing requirement of movement of goods by segregating freight from passenger traffic.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
Agencies
July 8,2020

Scientists have designed a “catch and kill” air filter which they say can trap the novel coronavirus and neutralise it instantly, an invention that may reduce the spread of COVID-19 in closed spaces such as schools, hospitals and health care facilities, as well as public transit environments like airplanes.

According to the study, published in the journal Materials Today Physics, the device killed 99.8 per cent of the novel coronavirus, SARS-CoV-2, in a single pass through its filter. It said the device, made from commercially available nickel foam heated to 200 degrees Celsius, also killed 99.9 per cent of the spores of the deadly bacterium Bacillus anthracis which causes the anthrax disease.

“This filter could be useful in airports and in airplanes, in office buildings, schools, and cruise ships to stop the spread of COVID-19,” said Zhifeng Ren, a co-author of the study from the University of Houston (UH) in the US.

“Its ability to help control the spread of the virus could be very useful for society,” Ren added.

The researchers said they are also developing a desk-top model for the device which is capable of purifying the air in an office worker’s immediate surroundings. According to the scientists, since the virus can remain in the air for about three hours, a filter that could remove it quickly was a viable plan, and with businesses reopening across the world, they believe controlling the spread in air conditioned spaces was urgent.

The study noted that the novel coronavirus cannot survive temperatures above 70 degrees Celsius, so by making the filter temperature far hotter — about 200 degree Celsius, the researchers said they were able to kill the virus almost instantly.

Ren said the nickel foam met several key requirements. “It is porous, allowing the flow of air, and electrically conductive, which allowed it to be heated. It is also flexible,” the researchers noted in a statement.But they added that nickel foam also had low resistivity, making it difficult to raise the temperature high enough to quickly kill the virus.

The researchers said they solved this problem by folding the foam, connecting multiple compartments with electrical wires to increase the resistance high enough to raise the temperature as high as 250 degrees Celsius. By making the filter electrically heated, rather than heating it from an external source, they said the the amount of heat that escaped from the filter is minimised, allowing air conditioning to function with very low strain.

When the scientists built and tested a prototype for the relationship between voltage/current and temperature, they said it satisfies the requirements for conventional heating, ventilation, and air conditioning (HVAC) systems, and could kill the coronavirus.

“This novel biodefense indoor air protection technology offers the first-in-line prevention against environmentally mediated transmission of airborne SARS-CoV-2, and will be on the forefront of technologies available to combat the current pandemic and any future airborne biothreats in indoor environments,” said Faisal Cheema, another co-author of the study from UH.

The researchers have called for a phased roll-out of the device, “beginning with high-priority venues, where essential workers are at elevated risk of exposure.” They believe the novel device will both improve safety for frontline workers in essential industries and allow nonessential workers to return to public work spaces.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
News Network
July 10,2020

Toronto, Jul 10: Pasteurising breast milk at 62.5 degrees Celsius for 30 minutes inactivates the SARS-CoV-2 virus that causes Covid-19, making it safe for consumption by babies, a study claims.

According to the research published in the Canadian Medical Association Journal, current advice for women with Covid-19 is to continue to breastfeed their own infants.

In Canada, it is standard care to provide pasteurised breast milk to very-low-birth-weight babies in hospital until their own mother's milk supply is adequate, the researchers said.

"In the event that a woman who is Covid-19-positive donates human milk that contains SARS-CoV-2, whether by transmission through the mammary gland or by contamination through respiratory droplets, skin, breast pumps and milk containers, this method of pasteurisation renders milk safe for consumption," said Sharon Unger, a professor at the University of Toronto in Canada.

The Holder method, a technique used to pasteurise milk in all Canadian milk banks at 62.5 degrees Celsius for 30 minutes, is effective at neutralising viruses such as HIV, hepatitis and others that are known to be transmitted through human milk, the researchers said.

In the latest study, the researchers spiked human breast milk with a viral load of SARS-CoV-2 and tested samples that either sat at room temperature for 30 minutes or were warmed to 62.5 degrees Celsius for 30 minutes.

They then measured for active virus, finding that the virus in the pasteurised milk was inactivated after heating.

More than 650 human breast milk banks around the world use the Holder method to ensure a safe supply of milk for vulnerable infants, the researchers said.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.