Unmanned US Air Force space plane lands after secret, 2-year mission

May 8, 2017

Cape Canaveral, May 8: The US military"s experimental X-37B space plane landed on Sunday at NASA"s Kennedy Space Center in Florida, completing a classified mission that lasted nearly two years, the Air Force said.

AirForce

The unmanned X-37B, which resembles a miniature space shuttle, touched down at 7:47 a.m. EDT (1147 GMT) on a runway formerly used for landings of the now-mothballed space shuttles, the Air Force said in an email. The Boeing-built space plane blasted off in May 2015 from nearby Cape Canaveral Air Force Station aboard an Atlas 5 rocket built by United Launch Alliance, a partnership between Lockheed Martin Corp and Boeing Co.

The X-37B, one of two in the Air Force fleet, conducted unspecified experiments for more than 700 days while in orbit. It was the fourth and lengthiest mission so far for the secretive program, managed by the Air Force Rapid Capabilities Office. The orbiters “perform risk reduction, experimentation and concept-of-operations development for reusable space vehicle technologies,” the Air Force has said without providing details. The cost of the program is also classified.

The Secure World Foundation, a nonprofit group promoting the peaceful exploration of space, says the secrecy surrounding the X-37B suggests the presence of intelligence-related hardware being tested or evaluated aboard the craft. The vehicles are 29 feet (9 meters) long and have a wingspan of 15 feet, making them about one quarter of the size of the National Aeronautics and Space Administration"s now-retired space shuttles.

The X-37B, also known as Orbital Test Vehicle, or OTV, first flew in April 2010 and returned after eight months. A second mission launched in March 2011 and lasted 15 months, while a third took flight in December 2012 and returned after 22 months.

Sunday"s landing was the X-37B"s first in Florida. The three previous landings took place at Vandenberg Air Force Base in California. The Air Force relocated the program in 2014, taking over two of NASA"s former shuttle-processing hangars.

The Air Force intends to launch the fifth X-37B mission from Cape Canaveral Air Force Station, located just south of the Kennedy Space Center, later this year.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
News Network
June 18,2020

Beijing, Jun 18:  Besides washing hands and wearing masks, it is also important to close the toilet lid before flushing to contain the spread of COVID-19, as per a new study.

According to a new study cited by The Washington Post, scientists who simulated toilet water and airflows, have found that flushing a toilet can generate a plume of virus-containing aerosol particles that is widespread and can linger in the air long enough to be inhaled by others. The novel coronavirus has been found in the faeces of COVID-19 patients, but it remains unknown whether such clouds could contain enough virus to infect a person.

"Flushing will lift the virus up from the toilet bowl," co-author Ji-Xiang Wang, who researches fluids at Yangzhou University in Yangzhou, China, said in an email. Wang stressed that bathroom users "need to close the lid first and then trigger the flushing process" and wash hands properly if the closure is not possible. As one flushes the toilet with the lids open, bits of faecal matter swish around so violently that they can be propelled into the air, become aerosolised and then settle on the surroundings.

Experts call it the "toilet plume".Age-old studies have been made to understand the potential for airborne transmission of infectious disease via sewage, and the toilet plume's role. Scientists who have seeded toilet bowls with bacteria and viruses have found contamination of seats, flush handles, bathroom floors and nearby surfaces. This is one reason we are told to wash our hands after visiting the toilet. Public bathrooms are well known to contribute to the spread of viruses that transmit via ingestion, such as the noroviruses that haunt cruise ships. However, their role in the transmission of respiratory viruses has not been established, said Charles P Gerba, a microbiologist at the University of Arizona."The risk is not zero, but how great a risk it is, we do not know. The big unknown is how much virus is infectious in the toilet when you flush it ... and how much virus does it take to cause an infection," said Gerba, who has studied the intersection of toilets and infectious disease for 45 years.

A study published in March in the journal Gastroenterology found significant amounts of coronavirus in the stool of patients and determined that viral RNA lasted in faeces even after the virus cleared from the patients` respiratory tracts. While another study in the journal Lancet found coronavirus in faeces up to a month after the illness had passed.

Scientists around the world are now studying sewage to track the spread of the virus. According to the researchers, the presence of the virus in excrement and the gastrointestinal tract raises the prospect of transmission via toilets, because many COVID-19 patients experience diarrhoea or vomiting.

A study of air samples in two hospitals in Wuhan, China found that although coronavirus aerosols in isolation wards and ventilated patient rooms were very low, "it was higher in the toilet areas used by the patients".The Centers for Disease Control and Prevention (CDC) says it remains "unclear whether the virus found in faeces may be capable of causing COVID-19," and "there has not been any confirmed report of the virus spreading from faeces to a person".For now, the CDC characterises the risk as low based on observations from previous outbreaks of other coronaviruses such as severe acute respiratory syndrome (SARS) and the Middle East respiratory syndrome (MERS). Wang decided to use computer models to simulate toilet plumes while isolating at home, as per Chinese government orders and thinking about how a fluids researcher "could contribute to the global fight against the virus".

Published in the journal Physics of Fluids, the study found that flushing of both single-inlet toilets, which push water into the bowl from one port, and annular-inlet toilets, which pour water into the bowl from the rim's surrounding edge with even greater energy, results in "massive upward transport of virus".

Particles can reach heights of more than three feet and float in the air for more than a minute, it found. The paper recommends not just lid-closing and hand-washing, it urges manufacturers to produce toilets that close and self-clean automatically. It also suggests that toilet-users should wipe down the seat. Gerba, however, said seats should not be a major concern.

Research has found that public and household toilet seats are typically the cleanest surfaces in restrooms, he said, probably because so many people already wipe them off before using them. Also, he said of SARS-CoV-2, the virus that causes COVID-19, "I don't think it's butt-borne, so I don`t think you have to worry."Gerba, who has been studying coronavirus transmission for two decades to investigate the role of a toilet flushing in a SARS outbreak stresses "flush and run" when using a public toilet without a lid. Gerba also said that people should wash hands well post-flushing and use hand sanitiser after leaving the restroom. "Choose well-ventilated bathrooms if possible and do not hang around the restroom in any case," added Gerba.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
News Network
January 27,2020

Mumbai, Jan 27: The country's largest car maker Maruti Suzuki India (MSI) on Monday said it has increased prices of select models by up to Rs 10,000 with immediate effect to offset the impact of rising input costs.

The price change varies across models and ranges up to 4.7 per cent (ex-showroom Delhi) and are effective from January, 27 2020, MSI said in a statement.

The price of entry level model Alto range has gone up in the range of Rs 9,000-6,000, S-Presso between Rs 1,500 to 8,000, WagonR between Rs 1,500 and Rs 4,000.

The company has also increased the price of its multi purpose vehicle Ertiga between Rs 4,000-10,000, Baleno by Rs 3,000 to 8,000 and XL6 by up to Rs 5,000 (all prices ex-showroom Delhi).

Currently, the company sells a range of vehicles starting from entry-level small car Alto to premium multi purpose vehicle XL6 with price ranging from Rs 2.89 lakh to Rs 11.47 lakh (ex-showroom Delhi).

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
Agencies
July 19,2020

New Delhi, Jul 19: Three of the 10 most valued companies added a total of Rs 98,622.89 crore to their market valuation last week, led by stellar gains in IT major Infosys.

Seven companies from the coveted list witnessed a decline in their market valuation last week, but their cumulative loss of Rs 37,701.1 crore was less than the total gain made by three firms -- Reliance Industries Limited, Hindustan Unilever Limited and Infosys.

The market capitalisation of Infosys zoomed Rs 52,046.87 crore to Rs 3,85,027.58 crore. Shares of Infosys had rallied over 9 per cent on Thursday after the company posted a stronger-than-expected 12.4 per cent rise in the first quarter consolidated net profit.

Hindustan Unilever Limited added Rs 25,751.07 crore in its market valuation which stood at Rs 5,48,232.26 crore at close on Friday. Reliance Industries' m-cap jumped Rs 20,824.95 crore to Rs 12,11,682.08 crore.

In contrast, HDFC's valuation plunged Rs 13,920.21 crore to Rs 3,13,269.70 crore and that of Tata Consultancy Services (TCS) declined Rs 7,617.34 crore to Rs 8,26,031.21 crore.

The valuation of ICICI Bank tumbled Rs 4,205.71 crore to Rs 2,29,156.24 crore and that of Kotak Mahindra Bank by Rs 4,175.28 crore to Rs 2,62,864.37 crore.

Bharti Airtel's m-cap dipped Rs 4,009.83 crore to Rs 3,09,521.05 crore and HDFC Bank's by Rs 3,403.97 crore to Rs 6,03,463.97 crore.

The valuation of ITC declined by Rs 368.76 crore to Rs 2,38,469.29 crore.

In the ranking of top-10 firms, RIL was at the number one rank followed by TCS, HDFC Bank, HUL, Infosys, HDFC, Bharti Airtel, Kotak Mahindra Bank, ITC and ICICI Bank.

During the last week, the 30-share BSE index advanced 425.81 points or 1.16 per cent.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.