1. Home
  2. Beer, wine bottles contain toxic substances: Study

Beer, wine bottles contain toxic substances: Study

Agencies
June 29, 2019

London, Jun 29: Bottles of beer, wine and spirits contain potentially harmful levels of toxic elements, such as lead and cadmium, in their enamelled decorations, a study has found.

Researchers at the University of Plymouth in the UK analysed both the glass and enamelled decorations on a variety of clear and coloured bottles readily available in shops and supermarkets.

They showed that cadmium, lead and chromium were all present in the glass, but at concentrations where their environmental and health risks were deemed to be of low significance.

However, the enamels were of greater concern, with cadmium concentrations of up to 20,000 parts per million in the decorated regions on a range of spirits, beer and wine bottles, and lead concentrations up to 80,000ppm in the decor of various wine bottles. The limit for lead in consumer paints is 90ppm.

The study, published in the journal Environmental Science and Technology, also showed the elements had the potential to leach from enamelled glass fragments, and when subjected to a standard test that simulates rainfall in a landfill site, several fragments exceeded the US Model Toxins in Packaging Legislation and could be defined as "hazardous".

He has previously shown that the paint or enamel on a wide variety of items, including playground equipment, second-hand toys and drinking glasses, can feature levels of toxic substances that are potentially harmful to human health.

"It has always been a surprise to see such high levels of toxic elements in the products we use on a daily basis. This is just another example of that, and further evidence of harmful elements being unnecessarily used where there are alternatives available. The added potential for these substances to leach into other items during the waste and recycling process is an obvious and additional cause for concern," said Dr Andrew Turner from the University of Plymouth.

For the study, bottles of beer, wine and spirits were purchased from local and national retail outlets between September 2017 and August 2018, with the sizes ranging from 50 ml to 750 ml.

They were either clear, frosted, green, ultraviolet-absorbing green (UVAG) or brown with several being enamelled over part of the exterior surface with images, patterns, logos, text and/or barcodes of a single colour or multiple colours.

Out of the glass from 89 bottles and fragments analysed using x-ray fluorescence (XRF) spectrometry, 76 were positive for low levels of lead and 55 positives for cadmium, according to the study.

Chromium was detected in all green and UVAG bottles, but was only in 40% of brown glass and was never in clear glass, it stated.

Meanwhile, the enamels of 12 products out of 24 enamelled products tested were based wholly or partly on compounds of either or both lead and cadmium.

"Governments across the world have clear legislation in place to restrict the use of harmful substances on everyday consumer products," Turner said.

"But when we contacted suppliers, many of them said the bottles they use are imported or manufactured in a different country than that producing the beverage. This poses obvious challenges for the glass industry and for glass recycling and is perhaps something that needs to be factored into future legislation covering this area," he added.

Comments

Add new comment

About text formats
  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
News Network
July 10,2020

Toronto, Jul 10: Pasteurising breast milk at 62.5 degrees Celsius for 30 minutes inactivates the SARS-CoV-2 virus that causes Covid-19, making it safe for consumption by babies, a study claims.

According to the research published in the Canadian Medical Association Journal, current advice for women with Covid-19 is to continue to breastfeed their own infants.

In Canada, it is standard care to provide pasteurised breast milk to very-low-birth-weight babies in hospital until their own mother's milk supply is adequate, the researchers said.

"In the event that a woman who is Covid-19-positive donates human milk that contains SARS-CoV-2, whether by transmission through the mammary gland or by contamination through respiratory droplets, skin, breast pumps and milk containers, this method of pasteurisation renders milk safe for consumption," said Sharon Unger, a professor at the University of Toronto in Canada.

The Holder method, a technique used to pasteurise milk in all Canadian milk banks at 62.5 degrees Celsius for 30 minutes, is effective at neutralising viruses such as HIV, hepatitis and others that are known to be transmitted through human milk, the researchers said.

In the latest study, the researchers spiked human breast milk with a viral load of SARS-CoV-2 and tested samples that either sat at room temperature for 30 minutes or were warmed to 62.5 degrees Celsius for 30 minutes.

They then measured for active virus, finding that the virus in the pasteurised milk was inactivated after heating.

More than 650 human breast milk banks around the world use the Holder method to ensure a safe supply of milk for vulnerable infants, the researchers said.

Comments

Add new comment

About text formats
  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
Dr G K Sudhakar Reddy
August 4,2020

Being overweight or obese is now recognised as a serious cause of ill health and disability. There is a significant positive association between orthopaedic disorders and the level of obesity causing pain, deformity and difficulty in walking.

Excess body weight accumulation increases pressure on joints, particularly the hips, knees and ankles.

Here are a few type of  arthritis:

Osteoarthritis

It is a condition of damage/ wear and tear of the joint lining or cartilage. Obesity triggers this by loading excessive weight on the weight bearing joints like the knee and the hip. 

Knee Osteoarthritis

This is the most common arthritis especially in the Indian subcontinent.

While walking, an individual exerts 3 to 6 times pressure that of the body weight on the weight-bearing knee joint, which means in an obese with excess body weight, larger forces are exerted, which lead to higher risk of deterioration of cartilage.

In addition, there are excessive fat tissues that produce hormones and other factors that affect the joint cartilage metabolism and cause inflammation of the joints giving rise to joint pathology.  Leptin is one of the hormones causing knee osteoarthritis. 

Hip osteoarthritis

The force exerted across the hip is 3 times that of body weight. Hip osteoarthritis is caused by factors such as joint injury, increasing age and being overweight.    

Hand osteoarthritis

The observation that obese individual has a higher risk in having hand osteoarthritis has led to a hypothesis that the metabolic effect produced by fat tissue is the underlying factor. 

Osteoporosis

It is a progressive bone condition of decrease in bone mass and density (Bone Mineral Density or BMD) which can lead to an increased risk of fracture. Recent research suggests that obesity may accelerate bone loss. It is the amount of muscle mass which is seen in an active person, which accounts for bone strengthening effects and not due to the fat seen in a heavy person.

Low back pain

Low back pain from degenerative disc disease of the lumbar spine is one of the most disabling conditions in the community and overweight and obesity have the strongest association with seeking care for low back pain.

Managing Hip and Knee Osteoarthritis

Life style changes

If one is overweight, try to lose weight by doing more physical activity and eating a healthier diet. Regular exercise keeps you active and mobile and builds up muscle, thereby strengthening the joints and can improve symptoms. 

Pain Killers

Painkillers help with pain and stiffness for short term. They don’t affect the arthritis itself and won’t repair the damage to your joint. Creams and gels can be applied directly onto painful joints.

Nutritional Supplements

Glucosamine and chondroitin are nutritional supplements. Animal studies have found that glucosamine can both delay the breakdown of and repair damaged cartilage. However, there is insufficient evidence to support the use of glucosamine in humans and one can expect only a mild-to-moderate reduction in pain

Joint injections

If pain from osteoarthritis is severe joint steroid injections are injected into the joints that can reduces swelling and pain. The injections can start working within a day or so and may improve pain for several weeks or months. 

Hyaluronic acid injections, which help to lubricate your knee joint also give short term relief. In early stages. Stem cell treatment or cartilage regeneration procedures are being tried in young people with small defects, however it is still experimental and lacks long term evidence.

Surgery

May be recommended if you have severe pain or mobility problems.

Arthroscopy

If one has frequent painful locking/stiffening episodes especially in the knee joint, an operation to wash out loose fragments of bone and other tissue as joint can be performed by a minimally invasive key hole procedure called Arthroscopy.

Arthrodesis

If hip or knee replacement is not suitable, especially in young people who do heavy manual work, one can consider an operation known as an arthrodesis, which fuses your joint in a permanent position. This means that your joint will be stronger and much less painful, although you will no longer be able to move it.

Osteotomy

In young, active people in whom a knee joint replacement would fail due to excessive use one can consider an operation called an osteotomy. This involves adding or removing a small section of bone either above or below your knee joint.  This helps realign your knee so your weight is no longer focused on the damaged part of your knee. An osteotomy can relieve your symptoms of osteoarthritis, although you may still need knee replacement surgery eventually as you grow old

Joint replacement surgery

Joint replacement therapy is most commonly carried out to replace hip and knee joints. It involves replacing a damaged, worn or diseased joint with an artificial joint made of special plastics and metal.

For most people, a replacement hip or knee will last for at least 20 years, especially if it is cared for properly and not put under too much strain.

Dr G K Sudhakar Reddy is a Sr Consultant Orthopaedic Surgeon at Citizens Speciality Hospitals, Hyderabad

Comments

Add new comment

About text formats
  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
Agencies
July 8,2020

Scientists have designed a “catch and kill” air filter which they say can trap the novel coronavirus and neutralise it instantly, an invention that may reduce the spread of COVID-19 in closed spaces such as schools, hospitals and health care facilities, as well as public transit environments like airplanes.

According to the study, published in the journal Materials Today Physics, the device killed 99.8 per cent of the novel coronavirus, SARS-CoV-2, in a single pass through its filter. It said the device, made from commercially available nickel foam heated to 200 degrees Celsius, also killed 99.9 per cent of the spores of the deadly bacterium Bacillus anthracis which causes the anthrax disease.

“This filter could be useful in airports and in airplanes, in office buildings, schools, and cruise ships to stop the spread of COVID-19,” said Zhifeng Ren, a co-author of the study from the University of Houston (UH) in the US.

“Its ability to help control the spread of the virus could be very useful for society,” Ren added.

The researchers said they are also developing a desk-top model for the device which is capable of purifying the air in an office worker’s immediate surroundings. According to the scientists, since the virus can remain in the air for about three hours, a filter that could remove it quickly was a viable plan, and with businesses reopening across the world, they believe controlling the spread in air conditioned spaces was urgent.

The study noted that the novel coronavirus cannot survive temperatures above 70 degrees Celsius, so by making the filter temperature far hotter — about 200 degree Celsius, the researchers said they were able to kill the virus almost instantly.

Ren said the nickel foam met several key requirements. “It is porous, allowing the flow of air, and electrically conductive, which allowed it to be heated. It is also flexible,” the researchers noted in a statement.But they added that nickel foam also had low resistivity, making it difficult to raise the temperature high enough to quickly kill the virus.

The researchers said they solved this problem by folding the foam, connecting multiple compartments with electrical wires to increase the resistance high enough to raise the temperature as high as 250 degrees Celsius. By making the filter electrically heated, rather than heating it from an external source, they said the the amount of heat that escaped from the filter is minimised, allowing air conditioning to function with very low strain.

When the scientists built and tested a prototype for the relationship between voltage/current and temperature, they said it satisfies the requirements for conventional heating, ventilation, and air conditioning (HVAC) systems, and could kill the coronavirus.

“This novel biodefense indoor air protection technology offers the first-in-line prevention against environmentally mediated transmission of airborne SARS-CoV-2, and will be on the forefront of technologies available to combat the current pandemic and any future airborne biothreats in indoor environments,” said Faisal Cheema, another co-author of the study from UH.

The researchers have called for a phased roll-out of the device, “beginning with high-priority venues, where essential workers are at elevated risk of exposure.” They believe the novel device will both improve safety for frontline workers in essential industries and allow nonessential workers to return to public work spaces.

Comments

Add new comment

About text formats
  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.