Soon, print your own smart tattoos, wearable fitness trackers

October 25, 2016

Washington, Oct 25: Scientists have created an inexpensive technique to print "data skin" - soft wearable electronics - paving way for smart tattoos that can be customised and printed at home.

chaoticResearchers created a fully functional "data skin" in under an hour. Since the method is based on inexpensive processing tools and materials, the circuits can be produced for less than a dollar.

When wrapped around the fingertip, a "data skin" embedded with an optical pulse oximetry chip can measure heart rate and blood oxygenation, or can bond to the back of the hand to monitor hand gestures.

After use, the "data skin" can be painlessly peeled from the skin and discarded.

"One of the remaining challenges in skin-mounted electronics is to interface soft circuits with the rigid microchips and electronics hardware required for sensing, digital processing, and power," said Carmel Majidi, professor at Carnegie Mellon University in the US.

"We address this with a breakthrough digital fabrication technique that enables efficient creation of wireless electronics on a soft, water-resistant, medical-grade adhesive," said Majidi.

Electronics produced from this method contain rigid components that are typically seen on a circuit board (such as transistors, microprocessors and power regulators) with soft deformable wiring that stretches and bends.

The method uses commercially available films to create wearable electronics through rapid prototyping and assembly techniques.

Using a combination of laser cutting with alignment control, researchers create individual layers and assemble them through a soft transfer printing technique.

Since the production is fast and inexpensive, users can create their own highly customisable wearable data skins.

"This new and versatile method to print skin-mountable electronics represents a first step towards a fully automated method in which non-experts can create their own customised wearables," said Majidi.

"No longer limited to smartphones and smartwatches, the next generation of personal electronics will be soft, stretchable, and stick to skin or clothing," he said.

"Moreover, they can be produced at home with an inexpensive printer not unlike a desktop laserjet," he added.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
News Network
June 30,2020

Bengaluru, Jun 30: Karnataka Chief Minister BS Yediyurappa on Monday launched 'Skill Connect Forum' and said that the government is committed to provide impetuous to creating jobs by reviving economic and industrial activities.

The 'Skill Connect Forum' portal connects both private entrepreneurs and job seekers on the same platform.

After launching the forum, the Chief Minister said that the portal provides information on jobs available and who needs a job. "Under this forum, an unemployed will be imparted skills and then enabled to get a job," Yediyurappa said.
Besides providing jobs via registration, the portal also provides a skilled pool of people for those looking to hire, he added.

Deputy Chief Minister Dr CN Ashwath Narayan, who is also the Skill Development Minister said that portal will be a boon to the youth seeking jobs and it will avoid unemployment issue to a great extent.

"All these years, there was no information and communication between job seekers and recruiters. The portal will solve that problem," he said.

Narayan said that there was no proper information on skilled workers and job market. Moreover, skill development was not in sync with the market. All these issues have been addressed by the portal, he added.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
Agencies
June 12,2020

Mumbai, Jun 12: Following an overwhelming response for the mega rights issue of Mukesh Ambani-owned Reliance Industries, the partly paid-up rights shares are set to debut on stock exchanges on June 15.

The biggest ever Rs 53,124 crore rights issue was subscribed 1.59 times and received bids worth Rs 84,000 crore on June 3.

Reliance said the rights issue saw a huge investor interest, including from lakhs of small investors and thousands of institutional investors, both Indian and foreign.

In 2019, Ambani said in the Reliance's annual general meeting that the company will be net zero debt by March 2021. The company is on course to achieve its target ahead of the deadline.

"In spite of the COVID-19 crisis and the lockdowns, the due-diligence by Saudi Aramco for the planned investment in the O2C business is on track as both the parties are committed and actively engaged," he said recently.

"With a strong visibility to these equity infusions, Reliance is set to achieve net zero debt status ahead of its own aggressive timeline. We believe rights issue was a part of the company's strategy of deleveraging its balance sheet," said Ambani. 

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
News Network
May 30,2020

May 30: Patients undergoing surgery after contracting the novel coronavirus are at an increased risk of postoperative death, according to a new study published in The Lancet journal which may lead to better treatment guidelines for COVID-19.

In the study, the scientists, including those from the University of Birmingham in the UK, examined data from 1,128 patients from 235 hospitals from a total of 24 countries.

Among COVID-19 patients who underwent surgery, they said the death rates approach those of the sickest patients admitted to intensive care after contracting the virus.

The scientists noted that SARS-CoV-2 infected patients who undergo surgery, experience substantially worse postoperative outcomes than would be expected for similar patients who do not have the infection.

According to the study, the 30-day mortality among these patients was nearly 24 per cent.

The researchers noted that mortality was disproportionately high across all subgroups, including those who underwent elective surgery (18.9 per cent), and emergency surgery (25.6 per cent).

Those who underwent minor surgery, such as appendicectomy or hernia repair (16.3 per cent), and major surgery such as hip surgery or for colon cancer also had higher mortality rates (26.9 per cent), the study said.

According to the study, the mortality rates were higher in men versus women, and in patients aged 70 years or over versus those aged under 70 years.

The scientists said in addition to age and sex, risk factors for postoperative death also included having severe pre-existing medical problems, undergoing cancer surgery, undergoing major procedures, and undergoing emergency surgery.

"We would normally expect mortality for patients having minor or elective surgery to be under 1 per cent, but our study suggests that in SARS-CoV-2 patients these mortality rates are much higher in both minor surgery (16.3%) and elective surgery (18.9%)," said study co-author Aneel Bhangu from the University of Birmingham.

Bhangu said these mortality rates are greater than those reported for even the highest-risk patients before the pandemic.

Citing an example from the 2019 UK National Emergency Laparotomy Audit report, he said the 30-day mortality was 16.9 per cent in the highest-risk patients.

Based on an earlier study across 58 countries, Bhangu said the 30-day mortality was 14.9 per cent in patients undergoing high-risk emergency surgery.

"We recommend that thresholds for surgery during the SARS-CoV-2 pandemic should be raised compared to normal practice," he said.

"For example, men aged 70 years and over undergoing emergency surgery are at particularly high risk of mortality, so these patients may benefit from their procedures being postponed," Bhangu added.

The study also noted that patients undergoing surgery are a vulnerable group at risk of SARS-CoV-2 exposure in hospital.

It noted that the patients may also be particularly susceptible to subsequent pulmonary complications, due to inflammatory and immunosuppressive responses to surgery and mechanical ventilation.

The scientists found that overall in the 30 days following surgery 51 per cent of patients developed a pneumonia, acute respiratory distress syndrome, or required unexpected ventilation.

Nearly 82 per cent of the patients who died had experienced pulmonary complications, the researchers said.

"Worldwide an estimated 28.4 million elective operations were cancelled due to disruption caused by COVID-19," said co-author Dmitri Nepogodiev from the University of Birmingham.

"Our data suggests that it was the right decision to postpone operations at a time when patients were at risk of being infected with SARS-CoV-2 in hospital," Nepogodiev said.

According to the researchers, there's now an urgent need for investment by governments and health providers in to measures which ensure that as surgery restarts patient safety is prioritised.

They said this includes the provision of adequate personal protective equipment (PPE), establishment of pathways for rapid preoperative SARS-CoV-2 testing, and consideration of the role of dedicated 'cold' surgical centres.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.