Soon, print your own smart tattoos, wearable fitness trackers

October 25, 2016

Washington, Oct 25: Scientists have created an inexpensive technique to print "data skin" - soft wearable electronics - paving way for smart tattoos that can be customised and printed at home.

chaoticResearchers created a fully functional "data skin" in under an hour. Since the method is based on inexpensive processing tools and materials, the circuits can be produced for less than a dollar.

When wrapped around the fingertip, a "data skin" embedded with an optical pulse oximetry chip can measure heart rate and blood oxygenation, or can bond to the back of the hand to monitor hand gestures.

After use, the "data skin" can be painlessly peeled from the skin and discarded.

"One of the remaining challenges in skin-mounted electronics is to interface soft circuits with the rigid microchips and electronics hardware required for sensing, digital processing, and power," said Carmel Majidi, professor at Carnegie Mellon University in the US.

"We address this with a breakthrough digital fabrication technique that enables efficient creation of wireless electronics on a soft, water-resistant, medical-grade adhesive," said Majidi.

Electronics produced from this method contain rigid components that are typically seen on a circuit board (such as transistors, microprocessors and power regulators) with soft deformable wiring that stretches and bends.

The method uses commercially available films to create wearable electronics through rapid prototyping and assembly techniques.

Using a combination of laser cutting with alignment control, researchers create individual layers and assemble them through a soft transfer printing technique.

Since the production is fast and inexpensive, users can create their own highly customisable wearable data skins.

"This new and versatile method to print skin-mountable electronics represents a first step towards a fully automated method in which non-experts can create their own customised wearables," said Majidi.

"No longer limited to smartphones and smartwatches, the next generation of personal electronics will be soft, stretchable, and stick to skin or clothing," he said.

"Moreover, they can be produced at home with an inexpensive printer not unlike a desktop laserjet," he added.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
Agencies
July 9,2020

Twitter has hinted that it is planning a paid subscription platform that can be reused by other teams in the future.

The news that the micro-blogging platform is building a subscription platform with a team codenamed "Gryphon" resulted in Twitter stock rising over 8% on Wednesday.

Twitter revealed its plan via a job listing that seeks a full-stack senior software engineer in New York to join "Gryphon".

Interestingly, Twitter "edited" the job listing once the news broke, removing the part about "Gryphon" and any mention of their internal team or their subscription feature. The listing said the company is looking for an Android engineer to "work on a bevy of backend engineering teams to build components that allow for experimentation to deliver the best experience possible to all of our users".

Later, Twitter users noticed that the company restored the earlier job listing that mentioned the upcoming subscription platform and "Gryphon".

A spokesperson for Twitter told CNN on Wednesday that it's only a job posting, not a product announcement.

This is not the first time Twitter has thought of a paid product. 

In 2017, it sent out a survey to users and a preview of what a premium offering of its TweetDeck app might look like, including breaking news alerts and more analytics, according to The Verge.

"We're conducting this survey to assess the interest in a new, more enhanced version of Tweetdeck. We regularly conduct user research to gather feedback about people's Twitter experience and to better inform our product investment decisions, and we're exploring several ways to make TweetDeck even more valuable for professionals," a Twitter spokesperson had said at that time.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
Agencies
June 13,2020

The Brazilian government said that the Amazon rainforest witnessed deforestation of a record 829 sq km in May, the highest monthly level since 2015.

On Friday, the National Institute for Space Research (INPE) said that deforestation in the Amazon increased by 91 sq km compared to the same period last year, reports Xinhua news agency.

Between January and April, destruction of the forest by illegal loggers and ranchers rose 55 per cent, or a total of 1,202 sq km was wiped out, it said.

The Real-time Deforestation Detection system, a federal project created to monitor human activity in the Amazon, alerted authorities to the increase in the rate of destruction of the rainforest.

A recent study by the Amazon Environmental Research Institute (IPAM) warned that deforestation in 2020 could reach 11,900 sq km if the pace of May, June, and July follows the historical average.

Deforestation in the region has soared since President Jair Bolsonaro took office last year, according to conservation groups.

He has argued that more farming and mining in protected areas of the forest were the only way to lift the region out of poverty.

Bolsonaro's environmental policies have been widely condemned but he has rejected the criticism, saying Brazil remains an example for conservation.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
Agencies
May 10,2020

In the wake of the gas leak at a factory in Visakhapatnam, the National Disaster Management Authority (NDMA) has issued detailed guidelines for restarting industries after the lockdown and the precautions to be taken for the safety of the plants as well as the workers.

In a communication to all states and union territories, the NDMA said due to several weeks of lockdown and the closure of industrial units, it is possible that some of the operators might not have followed the established standard operating procedures.

As a result, some of the manufacturing facilities, pipelines, valves may have residual chemicals, which may pose risk. The same is true for the storage facilities with hazardous chemicals and flammable materials, it said.

The NDMA guidelines said while restarting a unit, the first week should be considered as the trial or test run period after ensuring all safety protocols.

Companies should not try to achieve high production targets. There should be 24-hour sanitisation of the factory premises, it said.

The factories need to maintain a sanitisation routine every two-three hours especially in the common areas that include lunch rooms and common tables which will have to be wiped clean with disinfectants after every single use, it added.

For accommodation, the NDMA said, sanitisation needs to be performed regularly to ensure worker safety and reduce the spread of contamination.

To minimise the risk, it is important that employees who work on specific equipment are sensitised and made aware of the need to identify abnormalities like strange sounds or smell, exposed wires, vibrations, leaks, smoke, abnormal wobbling, irregular grinding or other potentially hazardous signs which indicate the need for immediate maintenance or if required shutdown, it said.

At least 11 people lost their lives and about 1,000 others were exposed to a gas leak at a factory in Andhra Pradesh''s Visakhapatnam on May 7.

The incident took place after it restarted operations when the government allowed industrial activities in certain sectors following several weeks of lockdown.

The lockdown was first announced by Prime Minister Narendra Modi on March 24 for 21 days in a bid to combat the coronavirus threat. The lockdown was then extended till May 3 and again till May 17.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.