World's first battery-free cell phone developed

July 9, 2017

Washington, Jul 9: Scientists, including those of Indian origin, have invented the first battery-less cell phone that consumes almost zero power and runs by harvesting energy from ambient radio signals or light.batteryfree

The team also made Skype calls using its battery-free phone, demonstrating that the prototype made of commercial, off-the-shelf components can receive and transmit speech and communicate with a base station.

"We have built what we believe is the first functioning cell phone that consumes almost zero power," said Shyam Gollakota, associate professor at the University of Washington (UW) in the US.

Researchers eliminated a power-hungry step in most modern cellular transmissions - converting analogue signals that convey sound into digital data that a phone can understand.

This process consumes so much energy that it has been impossible to design a phone that can rely on ambient power sources, researchers said.

Instead, the battery-free cell phone takes advantage of tiny vibrations in a phone's microphone or speaker that occur when a person is talking into a phone or listening to a call.

To transmit speech, the phone uses vibrations from the device's microphone to encode speech patterns in the reflected signals. To receive speech, it converts encoded radio signals into sound vibrations that are picked up by the phone's speaker.

In the prototype device, the user presses a button to switch between these two 'transmitting' and 'listening' modes, researchers said.

The prototype was able to perform basic phone functions - transmitting speech and data and receiving user input via buttons.

Using Skype, researchers were able to receive incoming calls, dial out and place callers on hold with the battery- free phone.

The team designed a custom base station to transmit and receive the radio signals. That technology conceivably could be integrated into standard cellular network infrastructure or Wi-Fi routers now commonly used to make calls.

"You could imagine in the future that all cell towers or Wi-Fi routers could come with our base station technology embedded in it, and if every house has a Wi-Fi router in it, you could get battery-free cell phone coverage everywhere," said Vamsi Talla, a research associate at UW.

The battery-free phone does still require a small amount of energy to perform some operations. The prototype has a power budget of 3.5 micro-watts.

Researchers demonstrated how to harvest this small amount of energy from two different sources. The battery-free phone prototype can operate on power gathered from ambient radio signals transmitted by a base station up to 31 feet away.

Using power harvested from ambient light with a tiny solar cell - roughly the size of a grain of rice - the device was able to communicate with a base station that was 50 feet away, they said.

The study was published in the journal Proceedings of the Association for Computing Machinery on Interactive, Mobile, Wearable and Ubiquitous Technologies.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
News Network
January 17,2020

Bengaluru, Jan 17: India’s latest communication satellite GSAT-30 was successfully launched from the Spaceport in French Guiana during the early hours on Friday.

In a press release, ISRO, has stated that the launch vehicle 'Ariane-5 VA-251' was blasted off from Kourou Launch Base, French Ginana at 0230 hours, carrying India’s GSA-30 and EUTELSAT KONNECT for Eutelasat, as per schedule.

The Ariane 5 upper stage in an elliptical Geosynchronous Transfer Orbit.

With a lift-off mass of 3,357 kg, GSAT-30 will provide continuity to operational services on some of the in-orbit satellites.

GSAT-30 derives its heritage from ISRO’s earlier INSAT/GSAT satellite series and will replace INSAT-4A in orbit.

“GSAT-30 has a unique configuration of providing flexible frequency segments and flexible coverage. The satellite will provide communication services to Indian mainland and islands through Ku-band and wide coverage covering Gulf countries, a large number of Asian countries and Australia through C-band," ISRO Chairman Dr K Sivan said.

Dr Sivan also said that “GSAT-30 will provide DTH Television Services, connectivity to VSATs for ATM, Stock-exchange, Television uplinking and teleport Services, Digital Satellite News Gathering (DSNG) and e-governance applications. The satellite will also be used for bulk data transfer for a host of emerging telecommunication applications.”

ISRO’s Master Control Facility (MCF) at Hassan in Karnataka took over the command and control of GSAT-30 immediately after its separation from the launch vehicle. Preliminary health checks of the satellite revealed its normal health.

In the days ahead, orbit-raising maneuvers will be performed to place the satellite in Geostationary Orbit (36,000 km above the equator) by using its onboard propulsion system.

During the final stages of its orbit raising operations, the two solar arrays and the antenna reflectors of GSAT-30 will be deployed. Following this, the satellite will be put in its final orbital configuration.

The satellite will be operational after the successful completion of all in-orbit tests.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
Agencies
June 9,2020

New Zealand's research institute in Antarctica is scaling back the number of projects planned for the upcoming season, in an effort to keep the continent free of coronavirus, it was reported on Tuesday.

The government agency, Antarctica New Zealand, told the BBC on Tuesday that it was dropping 23 of the 36 research projects.

Only long-term science monitoring, essential operational activity and planned maintenance will go ahead.

The upcoming research season runs from October to March.

"As COVID-19 sweeps the planet, only one continent remains untouched and (we) are focused on keeping it that way," Antarctica New Zealand told the BBC.

The organisation's chief executive Sarah Williamson said the travel limits and a strict managed isolation plan were the key factors for keeping Scott Base - New Zealand's research facility - virus free.

"Antarctica New Zealand is committed to maintaining and enhancing the quality of New Zealand's Antarctic scientific research. However, current circumstances dictate that our ability to support science is extremely limited this season" she said.

Earlier in April, Australia announced that it would scale back its activity in the 2020-21 summer season.

This included decreasing operational capacity and delaying work on some major projects.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.
Agencies
June 24,2020

New Delhi, Jun 24: The Centre has made it mandatory for sellers to enter the 'Country of Origin' while registering all new products on government e-marketplace (GeM).

The e-marketplace is a special purpose vehicle (SPV) under the Ministry of Commerce and Industry which facilitates the entry of small local sellers in public procurement, while implementing 'Make in India' and MSE Purchase Preference Policies of the Centre.

Accordingly, the ministry said the move has been made to promote 'Make in India' and 'Atma Nirbhar Bharat'.

The provision has been enabled via the introduction of new features on GeM.

Besides the registration process, the new feature also reminds sellers who have already uploaded their products, to disclose their products' 'Country of Origin' details.

The ministry further said that failing to disclose the detail will lead to removal of the products from the e-marketplace.

"GeM has taken this significant step to promote 'Make in India' and 'Aatmanirbhar Bharat'," the ministry said in a statement.

"GeM has also enabled a provision for indication of the percentage of local content in products. With this new feature, now, the 'Country of Origin' as well as the local content percentage are visible in the marketplace for all items. More importantly, the 'Make in India' filter has now been enabled on the portal. Buyers can choose to buy only those products that meet the minimum 50 per cent local content criteria."

In case of bids, the ministry said that buyers can now reserve any bid for a "Class I Local suppliers. For those bids below Rs 200 crore, only Class I and Class II Local Suppliers are eligible to bid, with Class I supplier getting purchase preference".

In addition to this, the Department for Promotion of Industry and Internal Trade (DPIIT) has reportedly called for a meeting with all e-commerce companies such as Amazon and Flipkart to display the country of origin on the products sold on their platform, as well as the extent of value added in India.

Comments

Add new comment

  • Coastaldigest.com reserves the right to delete or block any comments.
  • Coastaldigset.com is not responsible for its readers’ comments.
  • Comments that are abusive, incendiary or irrelevant are strictly prohibited.
  • Please use a genuine email ID and provide your name to avoid reject.